5 Programming
5.1 Overview
The device can be programmed locally using the keypad.
To enter programming mode:
-
Press PROG
-
The system will play: “Program”
-
The unit is now ready to accept commands
5.2 Keypad Functions
|
Key |
Function |
|---|---|
|
PROG |
Enter programming mode |
|
ENTER |
Confirm command or value |
|
CANCEL |
Cancel current entry / Exit menu |
|
REPLAY |
Replay parameter or value |
|
0–9 |
Input digits |
|
* |
Special character |
|
# |
Pause (for phone numbers) |
5.3 Programming Flow
Step 1 – Enter Programming Mode
Press:
PROG
System response:
"Program"
Step 2 – Select Parameter
Enter the parameter ID, then press:
ENTER
System will play the corresponding prompt.
Example:
1 ENTER → "Primary phone number"
Step 3 – Enter Value
-
Input the value using keypad
-
Press:
ENTER
Result:
-
Valid → “Input accepted”
-
Invalid → “Incorrect entry”
Step 4 – Replay Value
To check a parameter:
<Parameter ID> + REPLAY
Example:
1 REPLAY
System plays:
-
Parameter name
-
Stored value
Step 5 – Exit
-
Press CANCEL at parameter level → Exit menu
-
Press CANCEL during value entry → return to parameter selection
⏱️ Automatic exit:
Programming mode exits after 2 minutes of inactivity
5.4 Parameter List
1 – Primary Phone Number
-
Up to 25 digits
-
Allowed:
0–9,#(pause)
✔ Empty input clears the number
2 – Secondary Phone Number
-
Up to 25 digits
-
Allowed:
0–9,#(pause)
✔ Empty input clears the number
3 – Third Phone Number
-
Up to 25 digits
-
Allowed:
0–9,#(pause)
✔ Empty input clears the number
4 – Location Message
-
Record up to 15 seconds
-
After prompt and the beep:
"Location announcement – wait for beep"
5 – Station Number
-
Range: 1 – 80
-
Default: 1
6 – Access Code
-
Range: 0 – 99999
-
Default: 12345
7 – Operating Status (Playback only)
Possible outputs:
-
Normal
-
Charging Battery
-
Low Battery
-
Dead Battery
-
No Battery
-
No Main Power
-
Phone Line Fault
-
Line in use
-
Emergency call not connected
8 – Firmware Version
-
Playback only
9 – Language
|
Value |
Mode |
|---|---|
|
0 |
English |
|
1 |
French |
|
2 |
English/French |
|
3 |
French/English |
|
4 |
English/Spanish |
10 – Primary Ring Transfer Count
-
Range: 1 – 20
-
Default: 5 rings
11 – Secondary Ring Transfer Count
-
Range: 1 – 20
-
Default: 5 rings
12 – Third Ring Transfer Count
-
Range: 1 – 20
-
Default: 5 rings
13 – Talk Time
-
Range: 1 – 99 minutes
-
Default: 5 minutes
14 – Operator Wait Time
-
Range: 10 – 300 seconds
-
Default: 60 seconds
15 – Operator Prompt
|
Value |
Meaning |
|---|---|
|
0 |
OFF |
|
1 |
ON |
16 – Auto Answer
|
Value |
Mode |
|---|---|
|
0 |
OFF |
|
1 |
ON (with ring) |
|
2 |
ON (no ring) |
17 – Speaker Volume
-
Range: 1 – 10
-
Default: 5
18 – Microphone Volume
-
Range: 1 – 10
-
Default: 5
5.5 Special Behaviors
CANCEL Behavior
-
During value entry → cancels input
-
During parameter selection → exits programming
REPLAY Behavior
-
Reads parameter name
-
Reads stored value
-
Returns to menu
Audio Feedback
|
Event |
Audio |
|---|---|
|
Enter programming |
“Program” |
|
Valid input |
“Input accepted” |
|
Invalid input |
“Incorrect entry” |
|
Parameter select |
Parameter prompt |
|
Replay |
Parameter + value |
5.7 Example Programming
Set Primary Phone Number
PROG
1 ENTER
5145551234 ENTER
Check Station Number
5 REPLAY
Set Language to French
9 ENTER
1 ENTER